Student Corner
-
Sensor And Modules, Students Corner
XH-M452 XHM452 DC12V Temperature & Humidity Controller Output 10A Relay Control Thermostat Incubator Module in Pakistan
Sensor And Modules, Students CornerXH-M452 XHM452 DC12V Temperature & Humidity Controller Output 10A Relay Control Thermostat Incubator Module in Pakistan
This XH M452 humidity controller for incubator has good performance and accuracy. XH-452 temperature humidity controller has simple panel control, wide temperature range, simple design, elegant appearance, high mechanical strength. This digital temperature and humidity controller can be embedded in industrial equipment, convenient and fast. It can be used for hatch control, equipment cabinet, air conditioning system, temperature control protection, etc.
XHM452 Temperature and Humidity Controller Specifications:
- Model: XH-M452
- Size: 65x55x28mm
- Input voltage: DC 12V
- Detection accuracy: 0.1 Celsius
- Humidity range: 00%-100% RH
- Temperature range: -20~60 Celsius
- Detection accuracy: 0.1 Celsius 0.1% RH
- Output Type: Relay Output (Switch Output)
- Sensor: 1 Meter Temperature and humidity sensor
XHM452 Temperature and Humidity Controller Features:
- Simple setting.
- Easy installation.
- Power-down memory function.
- Custom load, arbitrarily selected.
- High precision 0.1 Celsius and 0.1% RH.
- Supports heating mode and cooling mode.
- Real-time display of temperature and humidity.
XHM452 Temperature Control:
- Set Start Temperature: Long press ‘Temperature +’ to set start temperature by key ‘Temperature +’ and ‘Temperature -’ and the display will flash. It will save automatically after 5 seconds and then display the current actual temperature.
- Set Stop Temperature: Long press ‘Temperature -’ to set stop temperature by key ‘Temperature +’ and ‘Temperature -’ and the display will flash. It will save automatically after 5 seconds and then display the current actual temperature.
XHM452 Humidity Control:
- Set Start Humidity: Long press ‘Humidity+’ to set start humidity by key ‘Humidity+’ and ‘Humidity-’ and the display will flash. It will save automatically after 5 seconds and then display current actual humidity.
- Set Stop Humidity: Long press ‘Humidity-’ to set stop humidity by key ‘Humidity+’ and ‘Humidity-’ and the display will flash. It will save automatically after 5 seconds and then display current actual humidity.
XHM452 Controller Application:
- Hatch control, Equipment cabinet, Air conditioning system, Temperature control protection, Refrigerator, Freezer, Water heater, Hosts, Printing factory, Tobacco industry, Hatchery control
Package Include:
- 1 x XHM452 Temperature and Humidity Controller
Best Online Shopping Website for XHM452 Temperature and Humidity Controller in cheap price in Islamabad, Karachi, Rawalpindi, Peshawar, Multan, Faisalabad, Quetta, and all over Pakistan.
SKU: n/a -
Sensor And Modules, Students Corner
DC-DC Buck XL4016 5-40V To 1.2-35V 9A
- Material: board and electronic component
- Input voltage: 5-40V
- Colour: as the pic shows
- Output voltage: 1.2-35V (continuously adjustable)
- Output Current: 9A (power tube temperature exceeds 65°C please add cooling fan)
- Constant current range:0.2-9A ( adjustable )
- Output Power: Maximum power is about 300W (power tube temperature exceeds 65°C please add cooling fan)
- Size: Approx. 2.55*1.88*0.94inch / 6.5*4.8*2.4cm(Length*width*thickness)
SKU: n/a -
Sensor And Modules, Students Corner
MQ-5 LPG Gas Sensor Module
MQ-5 sensor introduction:The gas sensitive material used by the MQ-5 gas sensor is two tin oxide (SnO2) with low conductivity in clean air. When combustible gases exist in the environment of the sensor, the conductivity of the sensor increases with the increase of the concentration of combustible gas in the air. A simple circuit can be used to convert the change of electrical conductivity into an output signal corresponding to the concentration of the gas. The MQ-5 gas sensor has high sensitivity to butane, propane and methane, and can give a good consideration to methane and propane. This sensor can detect a variety of flammable gases, especially natural gas, and is a low cost sensor suitable for many applications.Electrical performance:Input voltage: DC5V power consumption (current): 150mADO output: TTL digits 0 and 1 (0.1 and 5V)AO output: 0.1-0.3V (relatively pollution-free), the maximum concentration voltage is about 4VSKU: n/a -
RC Drones and Accessories, Students Corner
Flysky FS-TH9X 2.4G 9 Channel Transmitter with FS-iA10B Receiver
RC Drones and Accessories, Students CornerFlysky FS-TH9X 2.4G 9 Channel Transmitter with FS-iA10B Receiver
Specifications:
1. Channels: 9 channels;
2. Model type: heli, plane, glid;
3. RF power: less than 20dBm;
4 2.4G system: AFHDS
5. Code type: GFSK
6. Sensitivity: 1024;
7. Bandwidth: 500Hz
8. Low voltage warning: yes;
9. DSC port: Yes;
10. Charger port: yes;
11 Power: 12V DC (1.5 AAA * 8) Not included;
12.Weight: 670g;
13 Ant Length: 26mm;
14 Size: 185 * 220 * 110mm;
15 Color: black;
16 Certificate: CE FCC.Package includes:1x FS-TH9X transmitter
1x FS-IA10B receiverSKU: n/a -
Electronic Components, Students Corner
2 Pin Screw Terminal Block Connector
2 Pin 5.0mm PCB Screw Terminal Block Connector is a type of electrical connector where a wire is held by the tightening of a screw. 2 Pin 5.0mm PCB Screw Terminal Block Connector, commonly used to connect a chassis ground, such as on a record player or surge protector. Most public address systems in buildings also use them for speakers, and sometimes for other outputs and inputs. Alarm systems and building sensor and control systems have traditionally used large numbers of screw terminations.Grounding screws are often color-coded green and, when used on consumer electronics, often have a washer with gripping “teeth”.Printed circuit board (PCB) terminal blocks are specially designed with a copper alloy pin of suitable size and length and can be inserted in printed circuit boards to be soldered to allow electrical signals and current to flow to and from PCBs and electrical equipment. Some designs provide features that allow the flow of molten solder to ensure a better connection between the circuit traces of the board and the electrical equipment which is meant to be controlled or fed appropriate power.
2 Pin Terminal Block Specifications:
- Poles: 2P
- Pitch: 5. 0mm
- Housing: PA66. UL94V-0
- Pin header: Brass/ Tin Plated
- Screw: M2.5/ Steel/ Zinc plated or Brass
- Wire cage: Steel Zinc plated or Brass Ni plated
2 Pin Terminal Block Features:
- Captive screws.
- Guided pin alignment.
- 100% Brand new and high quality.
- Compact, lightweight, and durable.
- Double interlock mechanism for increased strength.
Mechanical:
- Strip length: 6-7mm
- Torque: 0.4 Nm (3.5 lb. in)
- MAX soldering: +250℃ for 5 sec.
- Temperature range: -40℃ – +105℃
Electrical:
- Rated voltage: 300V
- Rated current: 10A
- Wire range: 22-12 AWG
- Withstanding voltage: AC2000V/1 Min
Package Include:
- 1 x 2 Pin Screw Terminal Block Connector
Best Online Shopping Website for 2 Pin Screw Terminal Block Connector in cheap price in Islamabad, Karachi, Rawalpindi, Peshawar, Multan, Faisalabad, Quetta, and all over Pakistan.SKU: n/a -
Sensor And Modules, Students Corner
Buck Converter Board Power Supply AC-DC 5V 800mA
Warm prompt: Dear buyer, Our cheapest transportation services Economic category logistics (SunYou Economic Air Mail ,China Post Ordinary Small Packet Plus ) can be traced only befor it arrive your country,please choose Standard category logistics if you want a full tracking info.
eatures and parameters introducedThe power supply is isolated industrial power modules, with a temperature protection, overcurrent and short circuit full protection, high and low voltage isolation, AC85 ~ 265V wide voltage input, AC and DC, 431 DC5V output voltage precision, ultra-small size, high reliability, cost performance characteristics.Input voltage: AC 85 ~ 265v 50 / 60HZ or DC100v-370vOutput voltage: DC5V (± 0.2V)Output Current: 700mAPower: 3.5WSKU: n/a -
Sensor And Modules, Students Corner
St-link V2 Mini STM8 STM32 Simulator
NOTE:Its color is randomly!!! black, pink, red, and so on.Introduction-
1. support the full range of STM32 SWD debugging interface, a simple 4-wire interface (including power), fast, stable; interface definition housing directly marked! Do not need to read the manual;
-
2. support the full range of STM8 SWIM download debugging (common development environments such as IAR, STVD etc. are supported); supported software versions as follows:
-
① ST-LINK Utility 2.0 and 4.2.1 above
-
② STVD and above
-
③ STVP 3.2.3 and above
-
④ IAR EWARM V6.20 and above
-
⑤ IAR EWSTM8 V1.30 and above
-
⑥ KEIL RVMDK V4.21 and above
-
3. support for automatic firmware upgrades to ensure follow-up support ST products. The factory firmware has been upgraded to the latest V2.J17.S4;
-
4. increase the 5V power output, the output I / O ports are protected afraid of operational errors caused by ST-LINK V2 damage!
-
5. the interface easy to use copper gilded horns seat pitch of 2.54, with 20CM DuPont line, the line can respond to different target sequence, flexible wiring;
-
6. the use of U disk aluminum housing protects the motherboard, easy to carry, is not afraid of static electricity, afraid to fall throw touch.
-
7.with data package, containing: (e-file, disk, and network support Baidu QQ mailbox to send)
-
1, STLINK / V2 driver;
-
2, KEIL MDK (4.60) development environment (and other common development environments)
-
3, IAR STM8 (1401) development environment (and other common development environments)
-
4, STVD STM8 development environment (and other common development environments)
-
5, a number of classic STM32 information (including a large number of source code examples and video tutorials)
-
6, a number of classic STM8 information (including a large number of source code examples and
-
learning experience)
Shipping List-
ST-Link V2 Programming Unit mini STM8 STM32 Emulator Downloader: 1pcs
SKU: n/a -
-
Electronic Components, Students Corner
9.5×24.5cm Veroboard Dotted Large Stripboard
9.5×24.5cm Dotted Small Veroboard Stripboard Ideal for development and prototyping work. Dotted Small Veroboard Stripboard is designed primarily for hard wiring of discrete components, typically in analogue circuits, but is equally useful where a number of common bus or signal lines are required. Stripboard DIL board is manufactured from copper-clad laminated board which has been pierced with a grid of holes. It has a machined isolation strip making it suitable for quick and speedy layouts using Integrated circuits.
Dotted Large Veroboard Stripboard Specifications:
- Material: Fibreglass FR4
- Surface: Copper PCB
- Hole Diameter: 1.50mm
- Hole Pitch: 2.54mm
- Board Size: 9.5 x 24.5cm
- Board Thickness: 1.20mm
Dotted Large Veroboard Stripboard Features:
- Turn circuit diagrams into functional projects easily.
- Transfer your breadboard layouts on to a permanent base.
- Simple strip layout makes it easy to build complex circuits.
- Specifically designed to make working with DIL or DIP ICs easy.
- SRBP base material is very easy to cut to the required size with simple tools.
- Copper tracks are isolated from each other and can be cut to stop current flow.
Package Include:
- 1 x 9.5×24.5cm Veroboard Dotted Small Stripboard
Best Online Shopping Website for 9.5×24.5cm Veroboard Dotted Small Stripboard in cheap price in Islamabad, Karachi, Rawalpindi, Peshawar, Multan, Faisalabad, Quetta, and all over Pakistan.SKU: n/a -
Sensor And Modules, Students Corner
3-Axis Accelerometer Module GY-521 MPU-6050
Description
A 3-axis gyroscope and a 3-axis accelerometer are combined together on the same silicon die with an onboard Digital Motion Processor. Easy to get it fit into your project! It is very accurate, as GY-521 Mpu6050 Module contains 16-bits analog to digital conversion hardware for each channel. Therefor Three axis Gyrometer captures the x, y, and z channel at the same time. The sensor uses the I2C-bus to interface with the Arduino.
Features And Specifications Of GY-521 MPU6050 3 Axis Digital gyro + Accelerometer Three dimensional Angle sensor for Arduino:
- Build in ultra low noise linear LDO voltage regulator
- Build-in on board filters, which reduce noise from motor and other high current electronics
- All sensors connected to I2C bus
- You can easily select two I2C address for MPU6050 by soldered jumper
- Tri-Axis angular rate sensor (gyro) with a sensitivity up to 131 LSBs/dps and a full-scale range of ±250, ±500, ±1000, and ±2000dps
- Tri-Axis accelerometer with a programmable full scale range of ±2g, ±4g, ±8g and ±16g
- Digital Motion Processing™ (DMP™) engine offloads complex MotionFusion, sensor timing synchronization and gesture detection
- Embedded algorithms for run-time bias and compass calibration. No user intervention required
- Power LED
- Input Voltage: 2.3 – 3.4V
- Build in Logic level converter for I2C
- Digital-output temperature sensor
- Dimensions 20x16mm
- Designed for 5V logic level
Package Includes:
- 1 x GY521 MPU6050 Module 3 Axis Gyroscope Accelerometer Module
Best online shopping website for GY521 MPU6050 3 Axis Digital Gyroscope Accelerometer Sensor Module at cheap price in Lahore Faislabad Multan Quetta Sargodha Rahim Yar Khan Sialkot Sahiwal Gujrat Attock Gojra Sheikhpura Jahng Khanewal Okara Kasur Karachi and all over Pakistan
SKU: n/a -
Boards and Programmer, Students Corner
TFT LCD Shield Module SPI Serial Interface For Esplora
The Nextion Enhanced versions are more powerful than the standard ones. Compare to the basic Nextion displays,
the enhanced ones have added some new functions, such as: supporting built-in RTC, supporting save data to Flash,
supporting GPIO, larger flash capacity and larger CPU clock. The enhanced Nextion series has 7 size covers from generic 2.4” to 7.0”.
Nextion Enhanced NX8048K070 is a powerful 7.0” HMI TFT display, with 32MB Flash data storage space, 1024 byte EEPROM,
8192 byte RAM. With GPIO supported, now customers can use Nextion to control external devices.
Nextion is a seamless Human Machine Interface (HMI) solution that provides a control and visualization interface between a human
and a process, machine, application or appliance. Nextion is mainly applied to Internet of thing (IoT) or consumer electronics field.
It is the best solution to replace the traditional LCD and LED Nixie tube.
Nextion includes a hardware part (a series of TFT boards) and a software part (the Nextion editor). The Nextion TFT board uses
only one serial port to communicate. It lets users avoid the hassle of wiring. We noticed that most engineers spend much time in application development but get unsatisfactory results. As a solution to this situation, Nextion editor has mass components such as button, text, progress bar, slider, instrument panel etc. to enrich the interface design. Furthermore, the drag-and-drop function ensures that users spend less time in programming, which will reduce 99% of their development workloads. With the help of this WYSIWYG editor, designing a GUI is a piece of cake.
It’s easy to adapt Nextion family HMI to existing projects- users just need to provide it a UART.
Note: there’s a small power supply test board and a wire for you to test if the electricity supply is enough or not.
Please see below image on how to use it.
Features:
Supports built-in RTC
Supports GPIO
SD Card interface: support max 32G Micro TF/SD card (FAT32 file format)
Flash data storage space: 32MB
EEPROM: 1024 bytes
RAM: 8192 bytes
Instruction buffer: 1024 bytes
Color: 65K (65536) colors
Resolution: 800×480 pixel
Adjustable Brightness: 0~230 nit- the interval of adjustment is 1%
Specification:
Visual Area: 154.08mm(L)×85.92mm(W)
Layout size: 181(L)×108(W)×9.3(H)
Touch type: Resistive
Backlight: LED
Backlight lifetime (Average): >30,000 Hours
Net Weight: 268 g
Recommended power supply: 5V 2A
Certificates: CE/EMC, RoHS (certificates)
Package included:
1 x 7.0″ Nextion Enhanced HMI Display
1 x power supply test board
1 x 4-pin grove cableSKU: n/a -
Sensor And Modules, Students Corner
XH-W1315 Digital Temperature Controller
Parameters:
Product Name: High temperature digital thermostat
Specification Model:XH-W1315
Input voltage: DC12/24V
Temperature control range: -99-999°
Measuring range: K type thermocouple
Resolution: 1°C
Temperature measurement accuracy: ±2°C
Output type: 1 relay output
Instructions:
Correctly connect the circuit power, the digital display shows the current temperature
Code/code description/setting range/factory setting
P0/mode setting/cooling C/H heating/H
P1/setback/1-50°C/5°C
P2/temperature correction /-20-20°C/0.0
P3/high temperature alarm/0-999°C/OFF
Package included:
1 x XH-W1315 Temperature Controller Digital Thermostat K type Thermocouple Temperature Control Board -30-999 degree 12V 24V 220V
SKU: n/a -
Sensor And Modules, Students Corner
JSN-SR04 v3.0 Waterproof Ultrasonic Distance Sensor
Description
JSN-SR04T Waterproof Ultrasonic Distance Sensor Waterproof Ultrasonic Distance Sensor gives distance value using ultrasonic waves. JSN-SR04T Ultrasonic Sensor can be read using any microcontroller board like ARDUINO UNO, ARDUINO DUE, ARDUINO PRO MINI, ARDUINO NANO, AND OTHER DEVELOPMENT PLATFORMS.
Electrical parameters:
- JSN-SR04TOperating voltage: DC 5VQuiescent current: 5mATotal current work: 30mAAcoustic emission frequency: 40khzFarthest distance: 4.5mBlind: 25cmWiring: + 5V (positive power supply)Trig (control side) RXEcho (the receiver) TXGND (negative)Module size: 41mm * 28.5mmResolution: about 0.5cmAngle: less than 50 degreesWorking temperature: -10 ~ 70 ℃Storage temperature: -20 ~ 80 ℃
Product Features:
- small size, easy to use;
- low voltage, low power consumption;
- high accuracy;
- strong anti-jamming;
- integrated with wire enclosed waterproof probe, suitable for wet, harsh measurement occasions.
Application:
- Horizontal distance;
- obstacle avoidance, automatic control;
- the object approaches, there is a perceived
- traffic control;
- security, industrial control;
- artificial intelligence, and research
The basic working principle:
- (1) using IO port TRIG trigger location, to the high-level signal of at least 10us;
- the module automatically sends 8 40KHz Fang Bo, automatic detecting whether a signal return;
- a signal return, a high level is output through the IO port ECHO, the time duration of the high level is
- ultrasonic from launch to return. The test distance = (high level time * speed of sound (340M/S)) /2;
- This module uses the simple method, a control port with a 10US above high level, can wait for a high level
- output at the receiving port. An output can drive the timer when this port is low can read the timer value,
- this time for the location of the time can be calculated distance. So constantly cycle test, that can achieve
- the measurement of the value of your mobile.Package included:1 x Ultrasonic Module Distance Measuring Transducer Sensor Perfect Waterproof
Buy waterproof ultrasonic sensor water level sensor at Pakistan’s Best Online Shopping Store in low price. Wide range of waterproof ultrasonic sensor water level sensor. We deliver in Karachi, Lahore, Islamabad, Rawalpindi, Peshawar, Quetta, Multan and all over Pakistan
Package Includes:
1 x JSN-SR04 Waterproof Ultrasonic Distance Sensor
Product introduction:
The new version of SR04T-V3.0 recently released solves the problem of blind data jumps and improves the stability of the product. JSN-SR0T4-V3.0 ultrasonic ranging module can provide 21cm-600cm non-contact distance sensing Function, ranging accuracy can be as high as 3mm; the module consists of an ultrasonic sensor and control circuit integrated with transceiver. The usage of mode one is compatible with our HC-SR04 module
Features:
1. Small size and easy to use:
2. Low voltage and low power consumption:
3. High measurement accuracy;
4. Strong anti-interference;
5. Integrated closed waterproof probe with wire, suitable for wet and harsh measurement occasions
Product parameters:
Working voltage: DC: 3.0V-5.5V
Working current: less than 8mA
Probe frequency: 40kHz
The longest range: 600cm
Recent range: 20cm
Long range accuracy: ±1cm
Resolution: 1mm
Mileage angle: 75 degrees
Input trigger signal: 1. TTL pulse above 10uS; 2. Serial port sending command 0X55
Output echo signal Output pulse width level signal, or TTL
Wiring:
3-5. 5V (power +)
Trig (Control) RX
Echo (output) TX
GND (power-)
Working temperature: -20-+70 degree
Function description:6 modes
Mode 2: M2 short connection is serial port controlled output
Mode 1: M1 short connection is automatic serial output
Mode 0: Mode floating = trigger pulse width output (factory default mode)
Mode 3: Mode welding 200K = automatic distance pulse width output
Mode 4: Mode welding 360K = low power pulse width mode output
Mode 5: Mode welding 470K = switch mode output
Mode 1: Mode=open means no welding. The mode is explained as follows
Basic working principle:
(1) Adopt IO port TRIG to trigger ranging. Present a high level signal of at least 10us.
(2) The module automatically sends eight 40khz square waves and automatically detects whether a signal returns;
(3) When a signal returns, a high level is output through the IO port ECH0. The duration of the high level is the time from the transmission of the ultrasonic wave to the return. Test distance height = (high level time * speed of sound (348M/S))/2.
(4) After the module is triggered for ranging, if the echo cannot be received (the reason exceeds the measured range or the probe does not face the measured object), the ECHO port will automatically become low after 40MS, marking this time The measurement ends, regardless of success.
Mode 2: Mode=47K (or directly short M1 bit) UART automatic output
The UART automatic output mode outputs the measured distance value (hexadecimal number) according to the UART communication format. This mode does not require an external trigger signal. The module can automatically measure every 100ms. The TX pin outputs the measured distance value after each measurement is completed.
Mode 3: Mode=120K (or short M2 bit directly) UART controlled output
The UART controlled output method outputs the measured distance value (hexadecimal number) according to the UART communication format. In this method, the trigger command oX55 signal needs to be added to the RX pin. The module measures once every time the command is received. The foot outputs the measured distance value. The command trigger cycle should be greater than 60ms.
Mode 4: Mode=200K high level (PWM) pulse width automatic output
Under the pulse width PWM automatic output, the module automatically measures at a period of 200ms, and outputs a pulse width high level corresponding to the distance after the measurement. Calculating distance mode reference mode 1.
Mode 5: Mode=360K low power consumption (PWM) high level pulse width controlled output
In low-power mode, the module’s shut-down dog is disabled. This module is suitable for battery-powered users. The static power consumption is less than 70UA. The working distance measurement method is the same as mode 1.
Mode 6: Mode=470K switch output
The module will set a threshold value at the factory, the default is 1.5 meters. The module performs ranging every 200ms. When the detected distance value of the target is less than the set threshold, the Echo pin outputs a high level. The currently detected distance value is greater than the set threshold, and the Echo pin outputs a low power. In order to improve the stability, the factory defaults that the distance detected by the target for two consecutive times is less than the set threshold. Signal, no driving ability. Transistor drive relays should be added during application. If there are special requirements, you need to modify the threshold or other settings, you need to specify when purchasing.
SKU: n/a -
Accessories, Students Corner
Raspberry Pi Zero Acrylic Case in Pakistan
This case is made of acrylic with protective film, compatible with raspberry pi USB-A addon board.You can lengthen the screws by yourself if you need the more long screws, the specification of the current screw is PM2.5*14 mm.
Notes: Only includes the case.
Specifications:
- Material: Acrylic
- Color: Transparent
- Screw: PM2.5*14mm
Package Include:
- 1 x Raspberry Pi Zero Acrylic Case
Best Online Shopping Website for Raspberry Pi Zero Acrylic Case Raspberry Pi Transparent Casing in cheap price in Islamabad, Karachi, Rawalpindi, Peshawar, Multan, Faisalabad, Quetta, and all over Pakistan.SKU: n/a -
Sensor And Modules, Students Corner
Light Sensor TEMT6000
CJMCU – TEMT6000
An ambient light sensor simulation light intensity module Visible light sensor
TEMT6000 sensor maximum sensitivity of 570 nm, it has a plus or minus 60 ° wide half Angle of sensitivity.Although the device is sensitive to ambient light, but it inhibits infrared (IR) spectra, which can provide a similar higher visible spectrum response of the “eye”SKU: n/a
ColgRoad Top Selling
25W Submersible Water Pump
Specifications:
Attention:
Package Include:
LED Room Strobe 12
Specifications:
Features:
Package Include:
5V 2A Adapter
5V 2A Power Supply AC/DC Adapter is the best choice for your devices. 5V 2A Power Supply AC/DC Adapter allows portability of equipment powered either by mains or battery without the added bulk of internal power components, and makes it unnecessary to produce equipment for use only with a specified power source, the same device can be powered from 120 VAC or 230 VAC mains, vehicle or aircraft battery by using a different adapter. Another advantage of these designs can be increased safety, since the hazardous 120 or 240-volt mains power is transformed to a lower, safer voltage at the wall outlet and the appliance that is handled by the user is powered by this lower voltage.
Specifications:
Features:
Package Include:
VOYE V012A Wireless Door Bell
The doorbell button
contains a built-in radio transmitter powered by a battery. When the button is
pushed, the transmitter sends a radio signal to the receiver unit, which is plugged into a wall
outlet inside the building. When the radio signal is detected by the receiver, it activates a sound chip that plays the
sound of gongs through a loudspeaker either a two-note
“ding-dong” sound or a longer chime sequence. Frequencies in the 2.4 GHz ISM band are usually used. To avoid interference
by nearby wireless doorbells on the same radio frequency, the units can usually be set by the owner to
different radio channels.
Specifications:
10.8×6.7×3.3cm
indicator of the transmitter is on, the transmitter works, and the
receiver receives the command and sends
Package Include:
V012A Wireless Door Bell
IP66 50W LED Flood Light
High efficiency and energy-saving compared to conventional fluorescent which are equal bright, and consumes 70-80% less energy. No fluorescent flickering. No hazard of mercury or lead entering the environment. Low power consumption, high intensity, low lumen attenuation. Recessed mounted, maintenance free, easy installation. Solid- state, high shock/ vibration resistant. Adopting low- pressure constant current power supply, no glare, it indeed achieves soft luminescence, stabilization, continuity, and approximate natural light, which is a perfect light source.
Specifications:
Optical Parameters of High power LED Floodlight 50W |
|
Model |
ZL-TGD-50W |
Power |
50W |
LED chip |
Epistar /Bridgelux LED chip |
Brightness |
90lm/W |
Color Temperature |
2700-6500k |
Warm White: 2700-3200k |
|
Neutral White/Nature white 4000-4500K |
|
Day White: 5000-5500K |
|
Cool White, Cold White > 6500K |
|
CRI |
>80 |
Beam Angle |
120 degree |
Physical parameters of LED floodlight 50W |
|
Housing Material |
Aluminum Alloy |
Protection Rating |
IP65 / IP66 |
Current |
320 mA |
Voltage |
AC 85-265V |
Frequency |
50/60 HZ |
LED driver |
Excellent isolated constant current driver |
Long Life |
50,000h only Led |
Power Efficiency |
85% |
Features:
Package Include:
12V Car Washer Pump
Specifications:
Package Include:
12V Diesel Transfer Pump
This DC transfer pump is for fueling diesel, kerosene, not for gasoline. It used to fill or empty engines, tanks and all kinds of machinery, tractor and farm equipment.
Specifications:
Main Stem: Cast Iron
Voltage Input: DC12V
Weight: 8lbs
Inlet/ Outlet Port Fitting: 3/4
Rated Power:175w
Rate Current: 13A
Max Flow: 40L/minute
No-Load: 4500RPM
used For: Diesel Biodiesel Kerosene Only (not For Gasoline Or Solvents)
Max Suction Distance:5m
Head:10m
Pump Size: 8-1/4″L X 5-3/4″H X 7″ W( Measure With Two Brass Couplers)
Base Size: 3-1/2″ X 4-1/4″
Power Corded 6ft Aprox
Features:
Package Include:
Thermoelectric Cooler Peltier Module TEC1-12706 12VDC 6A Cooling Refrigeration Plate
Thermoelectric Cooler Peltier Module TEC1-12706 12VDC 6A Cooling Refrigeration Plate
A thermoelectric cooling (TEC) module is a semiconductor-based electronic component that functions as a small heat pump. By applying a dc power source to a tec, heat will be transferred from one side of the module to the other. It creates a cold and hot side. Using this TEC TEC1-12706 Thermoelectric cooler or thermoelectric Peltier get ice cold in minutes or heat to boiling by simply reversing the polarity.TEC12706 Cooling refrigeration Plate used for numerous applications from CPU coolers to alternate power sources, or even for your own custom car drink warmer/cooler. Since they consist primarily of semiconductor material sandwiched between ceramic plates and have no moving parts. These devices must be used in conjunction with a heat sink water block to avoid burned one side is cooling (Printed model number)and another side is heating (Printed no word) when working. Please radiating the heating side
Note:
Power on the device only with the proper heat-sink setup to avoid any burning/damage or malfunction of the device, use a fine heat sink (such as in CPU fans) with thermal paste, and power the device. Use a 12v dc power supply to power the tec1-12706. Use one aa battery for 10- 20 seconds to power on the device to find the hot /cold side
Features Of TEC1-12706 Thermoelectric Cooler Heat Sink Cooling Peltier 12 Volt 50-60 Watt:
Specifications Of 40x40mm Thermoelectric Cooler Peltier Refrigeration Plate Module:
50W LED Outdoor Light
50W LED Outdoor Light is the best use LED light for your daily routine.Has different features like no shadow, 80% energy-saving and environment-friendly, standard thick aluminium and tempered glass, IP66 waterproof etc. You can use this led light where you want to brighten with best energy-saving like your outdoor areas, landscape lighting, stage fountain cast light, building lighting, billboard lighting, hotels, bars, dance halls and other places of entertainment lighting and decoration.
Specifications:
Features:
Applications:
Attentions:
Package Include:
120W Solar Street Light
Solar street lights are raised light sources which are powered by solar panels generally mounted on the lighting structure or integrated into the pole itself. The solar panels charge a rechargeable battery, which powers a fluorescent or LED lamp during the night.
Specifications:
Model |
|
LT95120 |
|
Power |
|
120w |
|
Light source |
|
624 patches 5730 lamp beads |
|
Solar Panel Type |
|
Polycrystalline Silicon |
|
Luminous flux |
|
1200lm |
|
Install Height |
|
5-6M |
|
Lamp Dimension |
|
630*270*90mm |
|
Battery |
|
3.2V 18AH |
|
Solar Panel Power |
|
6V 18W |
|
Finished Color |
Black |
||
Material |
Die-casting Aluminum |
||
Color rendering index |
Ra>80 |
||
Rated life |
50000h |
||
IP Rating |
IP65 |
||
Working temperature |
-20~+60°C |
||
Charging |
6-8h Hours |
||
Control system |
Light sense + human body induction + remote control |
||
Application |
Highway, courtyard, road, outdoor, etc. |
||
Battery Type |
LiFePO4 Battery |
Advantages:
Package Include:
5M 12V LED Strip NEON Flexible Lights in Pakistan
12V Neon Flexible Strip Light IP65 Rating Size 16*12 5M Length Lamp Material Silica Gel
12V Neon Flexible Strip Lights Specifications:
12V Neon Flexible Strip Lights Features:
Package Include:
1 x 5M 12V LED Strip NEON Flexible Lights
Best Online Shopping Website for 5M 12V LED Strip NEON Flexible Lights Decoration Lights in cheap price in Islamabad, Karachi, Rawalpindi, Peshawar, Multan, Faisalabad, Quetta, and all over Pakistan
180W Solar Street Light
Solar street lights are raised light sources which are powered by solar panels generally mounted on the lighting structure or integrated into the pole itself. The solar panels charge a rechargeable battery, which powers a fluorescent or LED lamp during the night.
Specifications:
Model |
|
LT95180 |
|
Power |
|
180w |
|
Light source |
|
900 patches 5730 lamp beads |
|
Solar Panel Type |
|
Polycrystalline Silicon |
|
Luminous flux |
|
1700lm |
|
Install Height |
|
5-6M |
|
Lamp Dimension |
760*290*90mm |
|
|
Battery |
|
3.2V 24AH |
|
Solar Panel Power |
|
6V 24W |
|
Finished Color |
Black |
||
Material |
Die-casting Aluminum |
||
Color rendering index |
Ra>80 |
||
Rated life |
50000h |
||
IP Rating |
IP65 |
||
Working temperature |
-20~+60°C |
||
Charging |
6-8h Hours |
||
Control system |
Light sense + human body induction + remote control |
||
Application |
Highway, courtyard, road, outdoor, etc. |
||
Battery Type |
LiFePO4 Battery |
Advantages:
Package Include:
RGB Strobe Light
LED Room Strobe 18 has high quality LED, small, light and compact.
It has a sound sensor, which works according to the musical beat and an
adjustment button between random mode or sound beat. Perfect for you who want
to give a professional touch to your party by turning any party into a
“PARTY”.
Specifications:
Power: 20W
Model: STB-18
Material: Plastic Cement
Colors: RGB
Frequency: 50 / 60Hz
Color (Product): Black
LED Quantity: 18 Leds
Weight (Product): 0.7kg
Cable Length (Built-in): 116cm
Modes: Automatic / Sound Sensor
Voltage: AC 110V ~ 220V (BIVOLT)
Dimensions (Product): 245 x 50 x 150 ( L x W x H )
Features:
Plastic Cement Material.
Beat Sensitivity Programmer.
Strobo Programmer (Random or Rhythmic).
Strobo with 18 high quality LEDs, small, light and compact.
Perfect for you who want to give a professional touch to your party by turning any party into a “PARTY”.
It has a sound sensor, which works according to the musical beat and an adjustment button between random mode or sound beat.
Note:
Please dont use it in Humid Environment.
Please do not look directly into the light in case it can hurt the eyes.
Package Include:
1 x RGB Strobe Light
Heating Lamp Black Infrared Ceramic Emitter for Pet Brooder Reptile Lamp 25W 50W 75W 100W 150W 200W
Heating Lamp Black Infrared Ceramic Emitter for Pet Brooder Reptile Lamp 25W 50W 75W 100W 150W 200W
Sweet Tips:
In order to protect and extend the service life of the lamp, it is recommended to work within 2 hours each time.
Due to the difference of lights and displays, the color of the product may be different. In view of the different production batches, the color of the product may be slightly different, but it will not affect the normal use of the ceramic lamp. Please make sure you don’t mind Before you bidding!
Product Name: Ceramic Heater Lamp
Base Type: E27
Power: 25W/50W /75W /100W/150W/200W
Voltage: 220V-230v
Material: Ceramic
Colour: Black/Beige
Size: As picture
Features:
1.It features good heating property, but does not give out the stimulus light which will affect the pets to sleep .
2.Resistant to impact, can be exposed to water, can be heated for a long time.
3. Giving out far-infrared can not only keep the pets warm, but also has health care function.
Note:
1.The heater can only provide heat, no light.the surface is hot, do not touch it directly during use. If need to check the heater, please cut off the power first.
2.Ceramic lamp size is manually measured, please allow small deviations.
Package includes: 1 x ceramic reptiles heater
12V 8W Shafi Solar Water Pump in Pakistan
DC 12V Solar Water Pump Specifications:
DC 12V Solar Water Pump Features:
Package Include:
Best Online Shopping Website for 12V Solar Water Pump in cheap price in Islamabad, Karachi, Rawalpindi, Peshawar, Multan, Faisalabad, Quetta, and all over Pakistan.
CR2032 3V Coin Cell Battery in Pakistan
LiCB CR2032 or 2032 cell Lithium Coin batteries contain the substance manganese dioxide, which is chemically very stable. with high energy density and high voltage, a single 2032 Lithium Coin battery can replace two, three or more conventional batteries. If you’re looking for CR2032 batteries that are designed to provide reliable and long-lasting power, you’re at the right place.
For More Visit:
Specifications:
Features:
Applications:
Caution:
Package Include:
LC-16-Ⅱ LED Soft Ring Light
The LC-16 II ring lamp is a trendy tool for anyone working with light. It doesn’t matter who you are: blogger, professional photographer, or makeup artist. If the result of your work depends on the quality of lighting, do not skimp on the lamp! Ring light is the simplest and most correct solution for indoor and outdoor use at any time of the day or night.
Appearance:
The LC-16 II ring lamp with a diameter of 38 centimeters in a minimalist design does not annoy the visual, harmoniously complements the design of the workshop, photo studio, living room and even bedroom. There is nothing superfluous in it, and the correct geometry and adjustable tripod will satisfy even incorrigible perfectionists.
Functional:
The most important thing about the LC-16 II LED lamp is light. Warm, cold and natural – only 3 modes. Bright LEDs are responsible for flicker-free luminous flux stability and economical power consumption. Controlling light intensity and modes is easy with a dimmer switch. The lamp works from the network, changes the angle of inclination by 180 degrees, is compatible with the main models of smartphones and cameras (a special holder is used).
Who Suits:
Makeup artists visiting a client without an LED ring lamp are like a photographer without a camera. Adjustable light will help you stay autonomous, regardless of the weather, the level of lighting indoors or outdoors, and most importantly – to do the job perfectly.
Experienced photographers and videographers or beginners with a ring lamp will forget about photo and video defective due to lack of light! A convenient ring lamp on a tripod with a diameter of 38 cm will save the situation, help you achieve the super effect of those very shining eyes in the photo!
Brows, manicurists, tattoo artists, beauticians and anyone who needs uniform, stable lighting will appreciate the convenience of working with the lamp. The included mirror is a nice bonus.
Specifications:
Features:
Package Include:
IP66 30W LED Flood Light
High efficiency and energy-saving compared to
conventional fluorescent which are equal bright, and consumes 70-80% less
energy. No fluorescent flickering. No hazard of mercury or lead entering the
environment. Low power consumption, high intensity, low lumen attenuation.
Recessed mounted, maintenance free, easy installation. Solid- state, high
shock/ vibration resistant. Adopting low- pressure constant current power
supply, no glare, it indeed achieves soft luminescence, stabilization,
continuity, and approximate natural light, which is a perfect light source.
Specifications:
Optical Parameters of High power LED Floodlight 30W |
|
Model |
ZL-TGD-30W |
Power |
30W |
LED chip |
Epistar /Bridgelux LED chip |
Brightness |
90lm/W |
Color Temperature |
2700-6500k |
Warm White: 2700-3200k |
|
Neutral White/Nature white 4000-4500K |
|
Day White: 5000-5500K |
|
Cool White, Cold White > 6500K |
|
CRI |
>80 |
Beam Angle |
120 degree |
Physical parameters of LED floodlight 30W |
|
Housing Material |
Aluminum Alloy |
Protection Rating |
IP65 / IP66 |
Current |
320 mA |
Voltage |
AC 85-265V |
Frequency |
50/60 HZ |
LED driver |
Excellent isolated constant current driver |
Long Life |
50,000h only Led |
Power Efficiency |
85% |
Features:
Package Include:
XH-W3001 220V 10A Digital Temperature Thermostat in Pakistan
XH-W3001 220V 10A Digital Temperature Thermostat in Pakistan
This is an XH-W3001 XHW3001 220V 10A Digital Thermostat Switch. A temperature measurement and Controller tool with high accuracy and precision at a very low cost. XHW3001 Thermostat offers high-temperature control precision of 0.1℃. The Temperature controller range from -50℃ to 110℃.Digital Heat Controller features a 1M probe made up of stainless steel material which makes it waterproof and does not let it rust easily. Also, all the delicate and sensitive components are kept safe in ABS flame retardant housing which is avirulent and environmental protective.
XHW3001 Digital Temperature Controller Specifications:
XHW3001 Digital Temperature Controller Features:
Package Include:
56 eggs incubator Fully automatic with one rolling tray Best Quality
56 eggs incubator Fully automatic with one rolling tray Best Quality
*48/56 eggs incubator * Fully automatic * one rolling trays * Best Quality
DC: 12V – AC 220V
® 1 month Parts warranty
® Location is Rawalpindi
® Advance payment only
© Cargo available throughout Pakistan
30A Solar Charge Controller
The ‘CM’ series charge controller is an intelligent, multi-purpose solar
charge and discharge controller. The CM series includes an easy to read
LCD display and user friendly operation; various control parameters can be set
to meet your applications requirements. The 30 Amp CM3024 allows a maximum
solar input of 360W @ 12V & 7200W @ 24V. The charge controller powers off
the battery and should be connected to the battery before connecting to the
solar panel. We recommend that you follow the user manual prior to installing
the controller to your solar system.
Specifications:
Features:
Installation:
Package Include:
2KVA UPS 1800W 24VDC 230VAC Smart Personal Power Station Plus in Pakistan
2KVA UPS 1800W 24VDC 230VAC Smart Personal Power Station Plus in Pakistan
Smart Personal Power Station Plus is a DC-to-AC inverter with auto line-to-battery transfer and integrated charging system, serving as an extended run UPS, a standalone power source or an automotive inverter.Smart Personal Power Station Plus supplier power from AC power and DC source. When AC cable is connected to a wall socket, utility power goes to connected equipment(s) and /or charges the battery set via charging system. In battery mode, Smart Plus automatically converts battery energy into AC power for backing up the connected devices.
Specifications:
Features:
Note:
Package Include:
SUOER DC12V to AC230V 3000 WATT Inverter
This home inverter is extraordinarily designed for home use,which can convert DC 12V/24V of portable power supply to AC 110V/220V/230V and it works for almost all the household electrical resistive appliances such as MP3/MP4 player,cell phone, laptop, emergency light, electric blanket, electric shaver, electric cooker,digital camera, digital video,CD/DVD player,XBOX/PS4 game player, ordinary electric lamps, bulb,fluorescent light, rice cooker,electric iron,desktop computer, graphoscope,fax machines, printers, LCD TV, electric fans, cell phone chargers, electric iron , drinking fountain,hair dryer and so on.(Note:Only pure sine wave inverter can run sensitive electric appliances that are including Refrigerator, Washing Machine , Microwave oven, induction cooker , Air conditioner , electric drill, compressor, mercury lamp, sodium lamp and so on).
Specifications:
Features:
Package Include:
CS3024Z 12V / 24V 30A PWM Solar Charge Controller in Pakistan
CS3024Z 12V / 24V 30A PWM Solar Charge Controller One of the most modern PWM regulators. Created for professional applications, but also maintaining the aesthetics of home appliances. The advanced technology used allows for optimal energy management of charging and discharging the batteries.The controller is equipped with a clear display showing the device’s operating parameters (voltage, current, temperature, etc.) and two USB ports for charging portable devices. The cable clamps enable the connection of cables with a cross-section of up to 10mm2.
Specifications:
Features:
1.2. Night / day mode symbol. If the voltage on the panel increases, it will switch to day mode
3, 4, 5. The symbol indicates the displayed parameter (panel voltage, battery voltage, temperature)
6. Battery rated voltage setting detected
7. Digital value
8. Clock function
9. On / off operation indication (charging / not charging)
10. Displayed unit
11. Error signaling
12. State of the powered output on / off (on / off)
13. Signaling the direction of energy transmission
14. Battery charge indicator
15. Battery charging indication
Regulator operation modes:
Charging: the basic task of the regulator to work with the PWM function and protection of the battery against overcharging.
Dusk sensor: the controller will automatically turn on the lighting at dusk and turn it off at dawn.
Dusk sensor + clock: the regulator’s clock can be programmed to work from dusk for a selected number of hours. It will turn off powered loads at dawn or after an out-of-program time, whichever comes first.
Manual mode: enables manual activation / deactivation of receivers.
Powering the receivers via the USB port: The USB outputs available on the front panel enable the supply of receivers adapted to 5V.
Package Include:
Arduino Intelligent Solar Tracking Equipment
Arduino Intelligent Solar Tracking Equipment
Shipping List:
1. Frame + servo + accessories, including frame part, 2 servos, 4 photosensitive modules, 1 solar panel + voltmeter, screws, etc.
2. Full set robot= Frame + steering gear + accessories + Arduino control board and shield board The product is unassembled.
3. Frame: including frame + screws, does not include accessories such as steering gear, solar panels.
The project,Using the photosensitive module to calculate the position of light,Adjust the steering gear and aim the solar panel at the direction with the most abundant light.notes,This project is for demonstration,Solar panels don’t provide enough energy to support itArduinoPower required
Program and information download link:
1. https://create.arduino.cc/editor/wjd76/e225717a-ae15-4282-98bd-f9cf09400bee/preview
2. https://github.com/shihaipeng03/Sunflower
Canadian solar panel 445W in Pakistan
OVERVIEW:
Explore colgroad.com, Get the latest Canadian Solar Panels & other solar panels at a discounted price in Pakistan with cash on delivery service across Pakistan. We provide Canadian Solar Panels at official prices from distributors and dealers in Pakistan.
More Power:
More Reliable:
Solar Charge Controller-12V/24V auto-Solar Panel Battery Regulator
Solar Charge Controller-12V/24V auto-Solar Panel Battery Regulator
Fashionable and practicable design.
High quality and durable.
Nice shape and unique style.
Light weight and portable.
LCD display working status.
simple button operation.
Multi-function to choise.
PWM control mode.